Teco US TR5-60 - Manual (Page 6)

Page 10
Page 11
Installation and Assembly ALL MODELS
Flow Indicator
400 W Heater Kit
400 W Heater Kit - TR5 Only
15 W UV Sterilizer Kit
15 W Replacement UV Lamp
Flexible Tubing
Pump with the reccomended flow rate (see flow-rate specs on page 5)
Teflon Plumbers Tape (for PVC plumbing) or pipe thread sealant with Teflon
Tools you may need:
(for maintenance) Tongue & Groove Pliers, flat-head screwdriver, phillips-head screwdriver, pliers
Optional Parts
Required Parts and Tools (not Included)
The SeaChill will produce excessive heat and not work properly if not placed in a
well ventilated area. Compressor damage may occour.
WARNING:
Before cutting a ventilation hole or grate in an aquarium stand, contact the stand
manufacturer to insure that you will not compromise the structural integrity of the stand.
WARNING:
Teco SeaChill Chillers are intended for indoor operation. Do not expose chiller to outside elements or direct
sources of heat. Maximum allowed ambient temperature is 95°F/35°C. Do not operate chiller in temperatures
over 95°F/35°C.
If the chiller is placed in an enclosed space (a cabinet or aquarium stand) it must have an air inlet as well as
a ventilation outlet. The air inlet should be at least the same size and dimensions as the air outlet and can be
placed to face the sides or front of the chiller.
Chiller must have a space of at least 8 in/20 cm between the ventilation grate and the wall for proper ventilation
to take place. If the chiller is inside of an enclosed aquarium stand the chiller will need to be 8 in/20cm from the
walls of the stand. If ventilation grate or fans must be placed closer than 8 in/20 cm to the wall, it is necessary
to create a ventilation outlet the same size and shape as the chiller ventilation grate or fans in the wall.