Takagi T-M50 - Manual (Page 43)

- 43 -
OPTIONAL ITEMS
1. Temperature Remote Controller: 9007603005
(TM-RE30)
The Temperature Remote
Controller has two functions. It
allows the output temperature
from the water heater to be
adjusted within the range of
100 °F to 185 °F, and it also
works as a diagnostic tool that
will give a concise error code whenever there is a
problem with the unit. The temperature options are
100°F, 105°F, 110°F, 115°F, 120°F, 125°F, 130°F,
135°F, 140°F, 145°F, 150°F, 155°F, 160°F, 165°F,
170°F, 175°F, 180°F and 185°F. See the trouble
shooting section for information on possible error
codes.
2. Multi system controller: 9007675005
(TM-MC01)
The Multi- system controller
can control a maximum of
10 water heaters, from
15,000 BTU to 3,800,000
BTU. It also works as a
diagnostic tool that will give
a concise error code
whenever there is a problem
with the unit. Usage of this
controller requires having
the 9007603005 (TM-RE30)
remote controller.
3. Vent Damper: 9007679005 (TM-BF50)
The Vent Damper prevents the
backflow of air through the
exhaust vent. This helps prevent
harmful exhaust gases from
entering the home, as well as
helping to prevent the unit from
freezing in areas where cold air
can be blown or drawn into the
exhaust system. Install this vent
damper in accordance with the
manufacturer’s installation instructions, and any
applicable codes.
4. Vent Cap: 9007677005 (TM-VC50)
The Vent Cap is
for outdoor
installation with the
910 (T-M50) water
heater. The cap is
installed on the top
of the unit, instead
of connecting an
exhaust vent pipe. The cap will prevent any
debris that might be in the environment from
entering the unit and causing damage or a fire
hazard, as well as preventing rain or other
weather from entering the unit.
5. Direct-Vent Kit: 9007669005 (TM-DV50)
This kit can be used convert
the 910 (T-M50) from a
conventional vent system to a
direct-vent (or sealed
combustion) system. This is a
CSA tested conversion kit.
Install this conversion kit in
accordance with the
manufacturer’s installation
instructions and any applicable
codes.
6. Pipe cover: 9007673005 (TM-PC50)
The Pipe cover protects the
plumbing pipes to the 910 (T-
M50) from unexpected
adjustments. This pipe cover
is fixed to the bottom of the
water heater, which hides the
plumbing and improves the
visual aspects of the whole
installation for the water heater.