Sterlco TG 1200 Series Thermoform Granulators - Manual (Page 30)

T-Series Thermoforming Granulators Appendix 30 of 37
7-2 Drawings and Specifications (including options)
Features
Model
Throat Size Cutting
Circle
Diameter Throughput
(estimated – material
dependent)
Approximate
Weight
TG1244
(44”) 12” x 44”
(305 x 1118
mm) 12”
(305 mm) Up to 1,600 lbs./hr.
(Up to 726 kg./hr.) 4,000 lbs.
(1814 kg.)
TG1256
(56”) 12” x 56”
(305 x 1422
mm) 12”
(305 mm) Up to 2,000 lbs./hr.
(Up to 907 kg./hr.) 5,300 lbs.
(2404 kg.)
TG1274
(74”) 12” x 74”
(305 x 1880
mm) 12”
(305 mm) Up to 2,800 lbs./hr.
(Up to 1270 kg./hr.) 8,000 lbs.
(3629 kg)
Specifications
Standard Features Options & Accessories
In-feed In-feed Hopper Paddle Rolls
Feed Rolls – Poly smooth
Cutting
Chamber 2-Bed knives, drop down cradle
Rotor 5-knife Twinshear
Rotor Knives HCHC, keen edge
Bed Knives HCHC, 2-edge (reversible)
Screen 5/16”, 1-piece reversible 1/4", 3/8”, and larger
Base Low profile caster
Discharge TG1244 – 6” (152 mm) Airveyor
RH
#6 Blower (5 hp / 3.7 kW), #8
Separator, #8 Stand, #8 Side
Mounted Filter Head
TG1256 – 8” (203 mm) Airveyor
RH
#8 Blower (10 hp / 7.5 kW),
#10 Separator, #10 Stand, #10
Side Mounted Filter Head
TG1274 – 10” (254 mm) Airveyor
RH #10 Blower (15 hp / 11 kW),
#12 Separator, #12 Stand, #12
Side Mounted Filter Head
Motor TG1244 – 20 hp (15 kW) 30 hp or 40 hp (22 kW or 30
kW)
TG1256 – 30 hp (22 kW) 40 hp or 50 hp (30 kW or 37
kW)
TG1274 – 40 hp (30 kW) 50 hp (37 kW)
Feed Roll Motor 3/4 hp, D.C. 1 hp, D.C.
Drive Parts V-belt
Electrical
Components NEMA 12 with safety interlocks
Controls 230 or 460 Volt / 3 phase/ 60
Hertz, 115 Volt NEMA 12
Labels Safety/caution/operation (English) French/Spanish