AT&T CL82350 - Manual (Page 15)

10
Handset settings
Use the menu to change the telephone settings.
1. Press
MENU/
SELECT
when in idle mode (when the phone is
not in use) to enter the main menu.
2. Press q CID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates
the selected menu item.
3. Press
MENU
/SELECT to select the highlighted item.
NOTE: Press OFF/
CLEAR
to cancel an operation, back up to the previous menu or exit
the menu display. Press and hold OFF/
CLEAR
to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six levels or turn the
ringer off. When the ringer is off,
appears on the screen.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q CID or pDIR to scroll to >Ringers, then press
MENU
/SELECT.
3. Press
MENU
/SELECT again to select >Ringer volume.
4. Press q CID or pDIR to sample each volume level.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the main menu.
Press
OFF/
CLEAR
to cancel.
NOTE: The handset ringer volume also determines the ringer vol ume for
intercom calls (page 27). If the ringer volume is set to off, that handset is
silenced for all incoming calls.
Ringer tone
You can choose one of 10 ringer tones.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q CID or pDIR to scroll to >Ringers, then press
MENU
/SELECT.
3. Press q CID or pDIR to scroll to >Ringer tone, then press
MENU
/SELECT.
4. Press q CID or pDIR to sample each ringer tone.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the main menu.
Press
OFF/
CLEAR
to cancel.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
> Ringer volume
Ringer tone
RINGER VOLUME
RINGER TONE
> Tone 1
> Ringer tone
Ringer volume
Telephone settings
> Ringers
Settings
> Answering sys
Directory