Sterlco SPL Series Powder Hopper Loader - Manual (Page 39)

Powder Hopper Loaders Page 39
9 Spare Parts
9-1 Powder Hopper Loader System Component
Description
This section describes the various components of the loading
system. The loading system is made up of the following
components:
• Stainless steel vacuum receiver
• Tangential 1
1 /
2
” OD (about 38.1 mm OD) material
inlet
• High flow blowback valve with electrical quick disconnect
and accumulator
• Twin bag filter assembly with glazed polyester filter bags
• Receiver-mounted junction box with 8 feet (2.6 m) of cable
to a field-mounted control box
• Material demand/level sensor
• High-performance centrifugal motor with electrical quick
disconnect
• Sound enclosure
• 9-foot (2.7 m) power cord
• Dual tube aluminum pickup wand with ten (10) feet (3 m) of
grounded flexible vinyl hose and two (2) hose clamps
• Counter-weighted flapper assembly.
9-2-1 Overview
Component Identification and Location
This section will familiarize the reader with the components of the
powder loading system. After reading this section, the reader will
be able to identify the individual common components of the
loading system.