PATLITE ILB-12LJAW - Manual (Page 6)

5 10
4. Wiring
1）Lead wire details for the multi visual revolving warning light
●Before wiring, be sure to turn OFF the power supplies to the multi visual revolving warning
light and the electronic siren amplifier.
●To connect a speaker, be sure to wire in accordance with the sample speaker connection
diagram given in the electronic siren amplifier instruction manual. Connecting a speaker
with wrong impedance may lead to failure such as insufficient output or burning.
●Use a fuse of the specified or larger capacity.
●We recommend that a speaker and an amplifier made by the same manufacturer are used.
●Be sure to connect both the grounding wires to avoid failure.
●Insulate the unused lines individually with insulating tape.
●We recommend that the switches and relays for wiring are used.
Caution
Function
Ground (-)
Wire color
Red
White
Green
Black
Power supply (+)12V DC
Speaker wire (+) (11Ω)
Speaker wire common
2）Operating principle
●Applying 12V DC on the positive input lead of the internal/external LED total assembly
activates the respective revolving light.
3）Notes on relay wiring
●Use switches and switch auxiliary relays we recommend. When using other manufacturer's
switches or switch auxiliary relays, check the current capacity and select parts that have
double the capacity of the rated current.
●When wiring, be sure to keep all the wires removed from the battery until all wiring is completed.
●For wiring details for the revolving function, see 5-1 (page 7).
●Before wiring, be sure to turn OFF the power supplies to the multi visual revolving warning
light and the electronic siren amplifier.
●To connect a speaker, be sure to wire in accordance with the sample speaker connection
diagram given in the electronic siren amplifier instruction manual.
●Be sure to make the grounding wire as short as possible and securely connect a metal
(uncoated) part of the vehicle.
●Never ground or short-circuit the speaker wires. It may damage the electronic siren amplifier.
●Insulate any unused wire with insulating tape,etc.
●For the use of the electronic siren amplifier and advanced functions shown in the sample
wiring above (siren control by means of horn switch and amplifying the sound of the
walkie-talkie), see the instruction manual of the electronic siren amplifier separately provided.
●We recommend that a speaker and an amplifier made by the same manufacturer are used.
Caution
5. Wiring Circuits
Alley Light Function Wire color
Orange
Grey
Power supply (+)12V DC
Ground (-)
1） Dimensions
①ILB-12LJW type (unit:mm)
8. Specifications
Please check the list shown below before requesting repairs.
Please feel free to contact our sales offices if you have any questions concerning the product.
Problem Where to check
Is the power ON? ●Make sure that the power cord is connected properly.
●Eliminate any cause of the blown fuse and replace it
with a new one. Is the fuse on the end of life?
(Check the car and amplifier fuse)
What to do
The LED total assembly
does not flashing.
7.Before Requesting Service
●Reconnect the grounding wire correctly.
If the grounding wire connected
correctly?
※Please note that any malfunction or damage resulting from modification by the customer will
not be covered under the warranty.
300±5
1108±5 (A)
122±2
（95） φ13
(4900) 60±1
3950±5
(920)
118±1
225±2
E:9±1
30±1 10°
Hexagon bolt
(M8X20)
Bracket
assembly
FRONT
RIGHT HAND LEFT HAND
※The bracket assembly allows free adjustment of the height of the legs by adjusting the hexagon bolt (M8x20) within the
range of indicated adjustment (Dimension A).