PATLITE ILB-12LJAW - Manual (Page 5)

4 11
3. How to Mount
1)Mounting with the Hook Set (Optional)
●To fix the multi visual revolving warning light on a vehicle, separate hooks and bolts are required.
It is recommended to use the optional hook set (see page 14) by deforming to adapt them to
the vehicle.
●The multi visual revolving warning light is grounded with the body.
Do not let the positive terminal come in contact with a metal object. It may lead to a short circuit.
●To prevent immersion, be sure to take waterproofing/rustproofing measures for openings
such as the cord pullout.
●When installing the unit, be sure to tighten the hexagon bolts (M8x50) for fixing the hook
with sufficient torque. If they are not tightened enough, the unit may fall off.
Warning
Caution
① Place the multi visual revolving warning light at the center on the roof of the vehicle as seen
from the front.
② If the multi visual revolving warning light tilts forward or backward because of the tilt of the
roof, loosen the hexagon bolt (M8x20) that fixes bracket B, adjust the tilt in such a way that the
warning light is on the level and retighten the bolt.
③ Use hooks ※1 adapted to the shape of the roof the vehicle on which the warning light is to be
mounted. Attach the hooks on the protrusions of the sides of the roof, put on hexagon bolts
(M8x50) and pipe spacers, tighten the hexagon bolts into the hook fixing nuts of the bracket A
and pull the hooks inward to fix.
Hook [Optional part]
Hexagon bolt（M8×20）
（For fixing a hook）
Hexagon bolt（M8×50） [Optional part]
（For fixing a hook）
Pipe spacer [Optional part]
Roof
Hook fixing nut
Bracket Ａ
※1･・・The hooks included in the hook set do not have curved ends (that catch). When
mounting, bend the ends to obtain the optimum catch according to the shape of the roof
of the vehicle.
※We recommend applying the supplied rubber
sheet on the surface of the hook that comes
in contact with the vehicle for protection.
Rubber sheet
（Shown with a dotted line） Bracket Ｂ
②ILB-12LJAW type
( unit:mm )
FRONT
RIGHT HAND LEFT HAND
300±5
1108±5
2） Specifications
Model
Light source
Rated voltage
Power supply voltage range
Current consumption
Vibration proof
Operating temperature range
Flash per minute
Mass （with driver unit）
Speaker
Dome material
Power cable
Accessory
10V～15V DC
Average ： 2.75 A ± 0.3A (at 12.8V DC)
ILB-12LJAW ILB-12LJW
12V DC
20 units of LED Flasher
Combination flash
Approx.16.7 kg (100W driver unit included )
-30 ℃～+75℃
45m/s [up-down：4h（33Ｈz）、right-left：2h（33Ｈz)、back-forth：2h（33Ｈz)]
（with DU-100N driver unit installed ）
100W×1
PC
Instruction manual
UL1007 AWG20 ( 5000mm ) with Sumi tube 1000mm
2
Maximum： 5.5 A ± 0.5A (at 12.8V DC)
Flasher per minute ( Rated voltage at normal temperature )
Water proof SAE 575J
122±2
（95） φ13
(4900)
60±1
3950±5
(900)
118±1
225±2
E:9±1
30±1 10°
Hexagon bolt
(M8X20)
Bracket
assembly