Aussie 6T01U00SS1 - Manual (Page 19)

19
Key Description Quantity
1 Thermometer 1
2 Thermometer Bezel 1
3 Hood 1
4 Hood Pivot Pin 2
4A Hood Pivot Pin Nut (not shown) 2
5 Hood Handle Bezel 2
6 Hood Handle 1
7 Warming Rack 1
8 Cooking Grid 1
9 Flavor Activator 1
10 Piezo Igniter 1
11 Igniter Housing 1
12 Electrode (wire not shown) 1
13 Burner 1
14 Regulator/Valve 1
15 Grill Firebowl 1
16 Regulator Housing 1
17 Leg Nut 4
18 Leg Bolt 4
19 Leg 4
20 Drip Tray 1
21 Match Holder 1
Parts List
NOTE:
Some illustrations may vary slightly depending on grill Model, however the names are the same.
When ordering parts, it is VERY important to have the complete Model Number to receive the
correct replacement parts for your grill.
If you need replacement parts, refer to the Parts Illustrations to find the exact parts you need.
If you have any questions or need help, go to www.aussiegrills.com or contact Customer Service at 1-800-251-
7558. Be sure to have the grill model number and serial number that are printed on the label located on the inside
surface of the rear leg.
If you need a replacement part under warranty, a proof of purchase will be necessary. You will be asked to
forward your proof of purchase via e-mail or to fax your proof of purchase to 423-639-1055 and reference your model
and serial number.
It is important to register your grill and retain your receipt.