Ouellet WHFC - Manual (Page 2)

WHFC CEILING HEATER
Products # Volts Watts Btu Weight
WHFC1205 120 500 1706 8.0
WHFC1207 120 750 2559 8.0
WHFC1210 120 1000 3413 8.0
WHFC1215 120 1500 5120 8.0
WHFC2005 208 500 1706 8.0
WHFC2007 208 750 2559 8.0
WHFC2010 208 1000 3413 8.0
WHFC2015 208 1500 5120 8.0
WHFC2405 240 500 1706 8.0
WHFC2407 240 750 2559 8.0
WHFC2410 240 1000 3413 8.0
WHFC2415 240 1500 5120 8.0
Products # Description Weight
WHSC-C Surface mounting box 1 4.0
WHFG Replacement grill 2.1
DISTRIBUTED BY:
FEATURES
• 500 to 1500 Watts (1706 - 5120 Btu).
• 120 - 208 - 240 Voltages Available.
• 95 CFM tangential (squirrel cage) blower,
55 dBA at 3 pi (0.9 m).
• Large 75 cubic inch wiring compartment for easy installation.
• 20 gauge grill in white powder coat finish.
• Grill has large intake and outlet openings.
• 20 gauge ceiling recess box.
• Elements are helical coil nickel-chromium alloy wire
protected by mica insulation.
• Motor is vibration isolated by a shock absorbing rubber
end cap.
• Unique motor cooling system extends motor life.
• Listed under UL2021 - standard for electric air heating.
MODELS
OPTIONS
WIRING DIAGRAM
E1 E1
Single Element - Factory Wiring Two Element - Factory Wiring
Element Element
Tag
Limit Limit
Limit Limit
E2
L 1 L 1 L 2 Thermostat
(optional) Thermostat
(optional)
Capped
Ends
L 2 Power supply L 2 Power supply
L 2
E2
FAN FAN
DIMENSIONNAL DRAWING
230.2 mm
9 1/16 "
33.3 mm
1 5/16 "
25.4 mm
1"
30.2 mm
1 3/16 "
33.3 mm
1 5/16 "
304.8 mm
12"
Front View
Top View
Rear View
Side View
ø 4.8 mm
3/16 ”
KOE ø22 mm
KOE ø 7/8 ”
KOE ø22 mm
KOE ø 7/8 ” 16 mm
5/8 ”
88.9 mm
3 1/2 ”
102.4 mm
4 1/32 ”
51.5 mm
2 1/32 ”
57.9 mm
2 9/32 ”
114.3 mm
4 1/2 ”
346.2 mm
13 5/8 "
263.6 mm
10 3/8 "
ø 4.8 mm
3/16 ”
263.6 mm
10 3/8 "
31.5 mm
1 1/4 "
45 mm
1 3/4 "
346.2 mm
13 5/8 "
90 mm
3 9/16 "
102.5 mm
4"
Surface Box
Front View
Rear View
KOE ø22 mm
KOE ø 7/8 ”
51.5 mm
2 1/32 ”
66.6 mm
2 5/8 ”
165.1 mm
6 1/2 ”
180, 3 e Avenue, L’Islet (Québec) G0R 2C0 CANADA
Phone: 1 800 463-7043 • 418 247-3947
Fax: 1 800 662-7801 • 418 247-7801
[email protected] • www.ouellet.com
1 The fan heater assembly must be removed from the recess box and installed into
the surface mounting box.