NUUO SCB-C24 - Manual (Page 16)

The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
- 15 -
Step 4: IOConfig opens.
Step 5:
On the left pane of IOConfig, click Scan button.
Step 6:
IOConfig proceeds to check the COM port, baud rate and address for the connected C24.
Step 7:
In a few seconds the checking is through. Scan result shows on the right pane.
5.6. Configure Mainconsole
Step 1:
Open Mainconsole on PC.
Step 2: From Mainconsole tool bar, click button.
Step 3:
A menu opens.
Step 4:
Click Setting > System Setting.
Step 5:
Setting page opens featuring a series of tabs.
Step 6:
Click I/O Device tab.
I/O Device tabbed page opens.
Step 7: In Module field, dub C24 with a name.
Step 8:
By Device, specify C24 model name.
Step 9:
By COM Port, select the COM port of C24 as you have noted in section 5.5. Check C24 COM port,