Back to initial – NUUO SCB-C24 User Manual

Page 12

Text mode
Original mode

The Intelligent Surveillance Solution

NUUO NVR/DVR/Hybrid NDVR System

11 -

3.2. Back to Initial

The dip-switch supports “Back to Initial”, a function that puts a set of communication settings back to “initial”
state in case they cannot be remembered and thus disable C24 from being communicated with.

The “initial” state represents:

Setting

Value

9600

Name:

TRPC24

To bring C24 “Back to Initial”:

Step 1:

Close Mainconsole if it is opened.

Step 2:

Connect C24 to power if you haven’t.

Step 3:

Adjust dip-switch toggles to “off-off” position.

Step 4:

Disconnect C24 from power.

Step 5:

Adjust the toggles to “on-off” position.

Step 6:

Reconnect C24 to power.

Step 7:

Adjust the toggles to “off-on” position and C24 goes back to initial.