NUUO SCB-C24 - Manual (Page 14)

The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
- 13 -
5. Hardware Setup
This chapter combs through the necessary setup for the major components in the surveillance network
including:
1. peripherals,
2. I/O box C24,
3. converter C08,
4. Windows-based server PC.
5.1. Connect C08 to Server PC
An average Windows-based PC isn’t capable of RS485 communication. Therefore it needs C08, a
USB-to-RS485 converter, to be able to talk to C24.
Step 1: Connect C08 to PC an USB cable.
Step 2: On PC, install C08 driver.
- C08 driver is downloadable at www.nuuo.com > Download
Once driver is successfully installed, PC auto-detects C08 and generates a COM port for C08. Check it
up by clicking Start > Settings > Control Panel > System > Hardware tabbed page > Device Manager.
Click the plus (+) of Ports (COM & LPT). The COM port(s) in use will show.