Milestone Bosch Intuikey Keyboard Smart Client Plug-in - Manual (Page 10)

XProtect® Bosch Intuikey Keyboard Smart Client Plug-in
www.milestonesys.com Page 10 Configuration & Licensing
Joystick Options
For joystick setup, please go to Device Settings tab.
The joystick tilt direction on the BOSCH INTUIKEY is:
•
Joystick forward -> Tilt up
•
Joystick backwards -> Tilt down
This is the opposite of the default for a normal joystick.
The ‘Flip Up / Down’ switch enables the user to invert Tilt direction to match standard joystick.
By adjusting the Pan/Tilt and Zoom TrackBar, PTZ sensitivity can be changed as well.
Serial Port Properties Setup
•
COM Port: Select the COM (Serial) port the BOSCH INTUIKEY is connected to. The Drop-Down list
displays a list of all COM port on the computer.
•
Baud, Parity, Data Bits, Stop Bits, and Handshake: These must be the same values that are defined on
the BOSCH INTUIKEY by the system administrator.
Configurable Actions
The Bosch Intuikey SmartClient Plug-in contains a method for sending User-defined instructions to the
SmartClient. Currently, the number of configurable actions is configurable but limited to 640.