Milestone M10 - Manual (Page 25)

Milestone Husky M10 Administrator’s Manual
www.milestonehusky.com 24
Figure 33: Exclusion Grid.
In the middle of the motion detection page there are three sliding bars. The first two bars are
labeled “ Detection Adjustments.” You can use these bars to choose the size of movements
that the camera picks up and how sensitive the camera is to these movements. The third
sliding bar is labeled “ System Performance.” This bar controls the amount of impact that
motion detection has on the CPU. Therefore, the more impact on the CPU, the greater the
accuracy of motion detection.
Below is an example of the motion detection grid. Note how the tree area has been excluded
so that the camera will not trigger on the wind blowing the tree branches.