Milestone M10 - Manual (Page 13)

Milestone Husky M10 Administrator’s Manual
www.milestonehusky.com 12
Figure 15: View camera licenses.
License Cameras
The Milestone Husky M10 is a licensed product that must have cameras that are attached
to it activated within 30 days of adding each camera. After 30 days the cameras will stop
recording until activated. If your Milestone Husky M10 has access to the Internet, the
cameras are automatically activated in the background with no user intervention required.
With Internet Connection
If the unit has an Internet connection camera licenses will be automatically applied as
cameras are connected to the Milestone Husky M10. No manual steps are necessary. If you
are an Administrative User, you can you can check this feature on the Camera Settings page,
which you can find by clicking on the Settings tab in the upper right corner of the Home
page and selecting “Cameras” from the dropdown menu. In the bottom right corner of this
page you will see a section labeled “License” that will tell you how many of your licenses
are currently activated. This number should match the number of cameras that are currently
connected to the unit – unless they have been disabled.