Milestone M10 - Manual (Page 14)

Milestone Husky M10 Administrator’s Manual
www.milestonehusky.com 13
Figure 16: Needs attention.
Without Internet Connection
If the Milestone Husky M10 does not have an Internet connection, camera licenses must
be manually activated. There is a 30-day grace period after installation for the activation to
take place. After those 30 days, if the cameras have not been activated, the cameras will stop
being recorded. Cameras need to be activated:
• Within the first 30-days of installation.
• When a new camera is added.
• Whenever a camera is replaced.
If you plan to activate manually, it is best to connect all the cameras to the Milestone Husky
M10 first, so you can activate all the licenses at once. To manually apply camera licenses, you
must be on the Camera Settings page. To navigate to this page, click on the Settings tab in
the upper right corner of the Home page and select “Cameras” from the dropdown menu.
On the right side of this page you will see a section labeled “License” that has a red warning
box reading “Needs Attention,” meaning that the licenses need to be activated.