MadgeTech RFRHTemp2000A - Manual (Page 4)

Product User Guide
Product Overview
The RFRHTemp2000A is two-way Wireless temperature and humidity data logger with LCD.
Transmits up to 2000 ft maximum (outdoors unobstructed). Built-in memory also stores
data internally. This device is calibrated traceable to NIST and is available with a Calibration
Certificate. The RFRHTemp2000A is ideal for both industrial or laboratory applications
including supply chain storage facilities, incubator monitoring and HVAC studies. Designed
with external humidity and RTD based temperature sensors, the device provides a fast
response time for both parameters. The RFRHTemp2000A is a wireless temperature and
humidity data logging and alarming system with LCD display. A base is included with the
data logger for mounting purposes.
Selection Buttons
The logger is designed with 3 direct selection buttons: Scroll, Units and Wireless.
• Scroll: Allows user to scroll through current readings, average stats and device status
information displayed on the LCD Screen.
• Units: Allows user to change displayed units of measurement to either °F or °C.
• Wireless: Push and hold this button for 5 seconds to activate or deactivate wireless
communication.
• Manual Reset Option: Allows user to manually reset the statistics within the device to 0
without needing to use the MadgeTech software. Any data recorded up to that point is
recorded and saved. To apply the manual reset, press and hold the scroll key down for
three seconds.
LED Indicators
• Status: Green LED blinks every 5 seconds to indicate unit is logging.
• Wireless: Blue LED blinks every 15 seconds to indicate unit is operating in wireless mode.
• Alarm: Red LED blinks every 1 second to indicate an alarm condition.
2