Dwyer SSR-324 - Manual (Page 2)

Important Points!
Product must be maintained and installed in strict accordance with the National Electrical
Code and Dwyer product catalog and instruction bulletin. Failure to observe this warn-
ing could result in serious injuries or damages.
An appropriate explosion-proof enclosure or intrinsically safe interface device must be
used for hazardous area applications involving such things as (but not limited to)
ignitable mixtures, combustible dust and flammable materials.
Pressure and temperature limitations shown on individual catalog pages and drawings
for the specified products must not be exceeded. These pressures and temperatures
take into consideration possible system surge pressures/temperatures and their fre-
quencies.
Selection of materials for compatibility with the media is critical to the life and operation
of Dwyer products. Take care in the proper selection of materials of construction;
particularly wetted materials.
Life expectancy of switch contacts varies with applications. Contact Dwyer if life
cycle testing is required.
Ambient temperature changes do affect switch set points, since the specific gravity of
a liquid can vary with temperature.
Dwyer products have been designed to resist shock and vibration; however, shock and
vibration should be minimized.
Liquid media containing particulate and/or debris should be filtered to ensure proper
operation of Dwyer products.
Electrical entries and mounting points may require liquid/vapor sealing if
located in an enclosed tank.
Dwyer products must not be field repaired.
Physical damage sustained by the product may render it unserviceable.
DWYER INSTRUMENTS,INC.
P.O.BOX 373 MICHIGAN CITY, INDIANA 46361, U.S.A.
Phone: 219/879-8000 www.dwyer-inst.com
Fax: 219/872-9057 e-mail: [email protected]
Lit-By Fax: 888/891-4963
MAINTENANCE/REPAIR
Regular maintenance of the total system is recommended to assure sustained optimum
performance. These devices are not field repairable and should be returned to the
factory if recalibration or other service is required. After first obtaining a Returned Goods
Authorization (RGA) number, send the unit freight prepaid to the following. Please include
a clear description of the problem plus any application information available.
Dwyer Instruments, Inc.
Attn: Repair Department
102 Highway 212
Michigan City, IN 46360
Important Points!
Product must be maintained and installed in strict accordance with the National Electrical
Code and Dwyer product catalog and instruction bulletin. Failure to observe this warn-
ing could result in serious injuries or damages.
An appropriate explosion-proof enclosure or intrinsically safe interface device must be
used for hazardous area applications involving such things as (but not limited to)
ignitable mixtures, combustible dust and flammable materials.
Pressure and temperature limitations shown on individual catalog pages and drawings
for the specified products must not be exceeded. These pressures and temperatures
take into consideration possible system surge pressures/temperatures and their fre-
quencies.
Selection of materials for compatibility with the media is critical to the life and operation
of Dwyer products. Take care in the proper selection of materials of construction;
particularly wetted materials.
Life expectancy of switch contacts varies with applications. Contact Dwyer if life
cycle testing is required.
Ambient temperature changes do affect switch set points, since the specific gravity of
a liquid can vary with temperature.
Dwyer products have been designed to resist shock and vibration; however, shock and
vibration should be minimized.
Liquid media containing particulate and/or debris should be filtered to ensure proper
operation of Dwyer products.
Electrical entries and mounting points may require liquid/vapor sealing if
located in an enclosed tank.
Dwyer products must not be field repaired.
Physical damage sustained by the product may render it unserviceable.
DWYER INSTRUMENTS,INC.
P.O.BOX 373 MICHIGAN CITY, INDIANA 46361, U.S.A.
Phone: 219/879-8000 www.dwyer-inst.com
Fax: 219/872-9057 e-mail: [email protected]
Lit-By Fax: 888/891-4963
MAINTENANCE/REPAIR
Regular maintenance of the total system is recommended to assure sustained optimum
performance. These devices are not field repairable and should be returned to the
factory if recalibration or other service is required. After first obtaining a Returned Goods
Authorization (RGA) number, send the unit freight prepaid to the following. Please include
a clear description of the problem plus any application information available.
Dwyer Instruments, Inc.
Attn: Repair Department
102 Highway 212
Michigan City, IN 46360