Blue-White F-430N Machined Acrylic Tube - Manual (Page 4)

URL: www.Blue-White.com
E-mail: [email protected] Phone: 714-893-8529
[email protected] Fax: 714-894-0149
Exploded View and Parts List
Shading indicates item not sold separately
Maintenance
The “Exploded View” drawing illustrates assembly of the F-430N series meter. If your flowmeter needs to be
cleaned refer to this drawing when reassembling the unit. The tapered tube may be cleaned with a soft bottle
brush. Use a MILD soap and water solution for cleaning purposes. Note the floats “up” position.
Blue-white Industries
Limited Warranty
FLOWMETERS are warranted to be free of defects in material and workmanship for up to 12 months from the date of factory
shipment. Warranty coverage is limited to repair or replacement of the defective flowmeter only. Blue-White Industries does not
assume responsibility for any other damage that may occur.
This warranty does not cover damage to the flowmeter that results from misuse or alterations, nor damage that occurs as a
result of: meter misalignment, improper installation, over tightening, use of non- recommended chemicals, use of non-
reccomended adhesives or pipe dopes, excessive heat or pressure, or allowing the meter to support the weight of related piping.
Flowmeters are tested and calibrated with water and air only. Although meters may be suitable for other chemicals, Blue-White
cannot guarantee their suitability.
Flowmeters are repaired at the factory only. Call or write the factory to receive a Return Authorization Number, carefully pack the
flowmeter to be returned, including a brief description of the problem. Note the RA number on the outside of the carton.
Prepay all shipping costs. The factory does not accept COD Shipments. Damage that occurs during shipping is the responsibility
of the sender.
BLUE-WHITE INDUSTRIES
5300 Business Drive, Huntington Beach, CA 92649
(714) 893-8529 • FAX (714) 894-9492
F-430 Parts List. 1-1/2” and 2” male NPT
Catalog No. Description Amount Item
1
1
2
4
5
76001-226
1-1/2” male NPT adapter, PVC
F-430N
2
76001-216
2” male NPT adapter, PVC
F-430N
2
90003-118 O-ring, Viton 2
90003-140 O-ring, Aflas 2
Float
4-40 GPM / 15-150 LPM, SS
6-60 GPM / 20-230 LPM, SS
8-80 GPM / 30-300 LPM, SS
20-100 GPM / 75-375 LPM, SS
Hastelloy material is available
In all flow ranges
1
3 91001-198 Float Stop/Wire Holder, Polysulfone 2
Industries, Ltd.
Blue-White
Industries, Ltd.
®
F-430
Acrylic Meter
T
ube
1
2
3
4
5
6
7
4
3
2
1
6 76001-229 Guidewire, SS (standard) 1
6 76001-230 Guidewire, Hastelloy 1
7 Body F-430 Acrylic Tube 1