Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 25)

Installing the ME Driver (Windows XP)
1 From the ORION Meter Reading System DVD, Disc 1, copy the Msp430_CdC.inf file
2 Click the Windows Start button Then click My
Computer and paste the Msp430_CdC.inf file on the
C:\ drive of the laptop
Result: the file appears in the C:\ drive as shown in
Figure 49.
3 Connect the ME/SE transceiver to a power supply
and to a USB port on the laptop
When it is connected to the laptop, turn the ME/SE
transceiver power on
Result: a small window opens at the bottom of the
computer screen alerting you to new hardware.
NOTE: N If the new hardware alert does not display
automatically, disconnect the ME/SE
transceiver and reconnect it Make sure the
ME/SE transceiver is connected to a power
supply and is switched on after you connect
it to the USB port The power light should
be on, indicating the transceiver is on
Figure 49: Msp430 CdC.inf on the C:\ drive
4 The New Hardware Wizard should open
automatically as shown in Figure 50 If it does not,
click the small new hardware alert window described
in Step 3
5 Select the radio button next to "No, not this time"
and click Next
Figure 50: new Hardware wizard
InstallIng tHe oRIon Me utIlIty (wIndows 7 and wIndows Xp)
Page 25 July 2013 ORION® Mobile Reading System Software Installation