Amerequip 8600 Backhoe - Manual (Page 20)

21
Figure 11 Figure 12
3. Remove plastic bag containing bucket pins from
backhoe. Attach bucket (D) to dipperstick using one
pin, two bolts, nuts, lockwashers, pin retainers and
washers as needed to take up gap under pin retainers.
4. Attach bucket link (E) to bucket, using same hard-
ware as listed for step #3.
5. Reposition hoist to backhoe to prevent tipping.
Remove all remaining strapping and attach stabilizers
(F) to mainframe (G) using pins and hardware assem-