Amerequip 8600 Backhoe - Manual (Page 19)

20
Reposition stabilizer cylinders from their shipping con-
figuration (See Fig. 11), by assembling them into the
Mainframe, using pins and hardware provided. Be
sure cylinder ports are pointed upward and hoses are
routed above the cylinder to mainframe pivot pin con-
nection. See Fig. 12.
2. Support boom(A) and dipperstick(B) with hoist and
remove boom transport lock pin. Lower boom and
manually extend dipperstick until it rests on ground.
Move control handle to "BOOM DOWN" position as
- Figure 10
Figure 10
Figure 10.
D
E
I
H
F
G
A
B
C