Displays and menus – Alicat MC Series Mass Flow Controller User Manual

Page 14

+21.50

+0.00

CCM

SETPT

0.000

SCCM

Air

PSIA

+13.60

+0.00

SCCM

Main

+0.00

SETPT

0123.4

SLPM

+123.4

TOTAL/

TIMER

BATCH

RESET

0000:09:59 SCC

00123.45

00123.45 Batch Done

The Main display shows pressure,

temperature, set-point, volumetric flow

and mass flow.
Pressing the button adjacent to a

parameter will make that parameter

the primary display unit.
By hitting the MENU button at the

bottom right of the screen you will

enter the Select Menu display.

If your controller was ordered with the

Totalizer option (page 43), pushing the

TOTAL button once will bring up the

Totalizing Mode display. Pushing MENU

will bring up the Select Menu display.

DISPLAYS AND MENUS

The device screen defaults to Main display as soon as power is applied to the controller.

Select Menu
From Select Menu you can change

the selected gas, interact with your

RS-232 / RS-485 settings, read

manufacturer’s data or access the

control set-up display.
Push MAIN to return to the Main display.

Totalizer (option only)

C ONTROL

SETUP

RS232

COMM

MFG

DATA

MAIN

MISC

GAS

SELECT

Select Menu