Alicat V Series Volumetric Flow Meter User Manual

Page 14

Select Menu Mode
Pushing “Mode” once will bring up the “Select Menu” display. Push the button nearest your selection to

go to the corresponding screen. Push “Mode” again to return to the Main Mode display. (

Note: If your

meter was ordered with Totalizing Mode option (page 38), pushing the “Mode” button once will bring up

the “Totalizing Mode” display. Pushing “Mode” a second time will bring up the “Select Menu” display.)

Gas

Misc

SELECT

Comm. Mfg.
RS232 Data Menu

Figure 7. Select Menu Display

Gas Select Mode
The gas select mode is accessed by pressing the button above “Gas” on the Select Menu display. The

screen will appear as shown in Figure 8 below.

PgUP PgDWN Main

H2 Hydrogen
He Helium
>N2 Nitrogen
N2O Nitrous Oxide
Ne Neon
O2 Oxygen
UP DOWN Gas

Figure 8. Gas Select Display

The selected gas is displayed on the default main mode screen as shown in Figure 6, and is indicated

by the arrow in the Gas Select Mode screen in Figure 8. To change the selected gas, use the buttons

under “UP” and “DOWN” or above “PgUP” and “PgDWN” to position the arrow in front of the desired

gas. When the mode is cycled back to the Main Mode, the selected gas will be displayed on the main

screen. (

Note: Gas Select Mode may not be available for units ordered for use with a custom gas or

blend.)