beautypg.com

3 . p r e pa r at i o n – Thermo Fisher Scientific CyberScan PC 10 User Manual

Page 8

background image

Instruction Manual

PC 10

- 4 -

3 . P R E PA R AT I O N

3.1 Inserting the Batteries

The meter is packaged with 4 “AAA” alkaline batteries required for operation. To insert the
batteries into the meter, follow the procedure outlined below.

1.

Use a Philips screwdriver to remove the two screws holding the battery cover. See Figure
6 below.

2. Remove

battery

cover.

3.

Insert batteries. Follow the diagram inside the cover for correct polarity.

4.

Replace the battery cover into its original position using the two screws removed earlier.

Figure 4: Battery Compartment