Techne TC-412 - Manual (Page 19)

17
BEFORE SWITCHING ON
Serial port
Ensure that the voltage selector switch
is set to the appropriate voltage for
your supply;
On/Off switch
Ensure that the appropriate fuses are
fitted for your supply:
• For 230V set the voltage selector
switch to 230V and fit T6.3A fuses.
• For 115V set the switch to 115V and
fit T8A fuses.
• For 100V the switch will be set to
115V; T10A fuses will be fitted.
TC412 Techne Manual 19/12/08 3:37 PM Page 19