beautypg.com

Introduction – Techne DB200-3 User Manual

Page 5

background image

5

INTRODUCTION

Please read all the information in this manual before using the unit.

Techne Dri-Block

®

heaters provide a safe, dry, constant temperature source in the laboratory. The

units can be used for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme

analysis and many other clinical and industrial purposes.

The units cover the temperature range from ambient +5°C to 100°C or 200°C (depending on model)

using machined aluminium alloy blocks as the heat transfer medium. Independent indicator lights

indicate mains power, heater action and over-temperature cut-out. An ON/OFF switch is mounted on

the rear panel, together with the mains connector and a double fuse holder.

Temperature setting is via a simple push button display. Temperatures can be displayed in °C or °F.

Each unit also has a built-in count-down timer which can be set in 1 minute intervals to 99h 59m.

The units are constructed of painted aluminium alloy and polyphenylene sulphide (PPS) plastic,

which is strong yet lightweight and can resist sustained temperatures as high as 260°C. Even though

the units heat up rapidly, venting and highly efficient insulation ensure that the cases remain cool

enough to handle even at maximum operating temperatures.

Each unit is supplied with an extraction tool for easy removal of the insert blocks.

The operating instructions in this Operator’s Manual cover the following range of digital Dri-Block

®

heaters:

Model number

Description

Voltage,
frequency

DB100/2

Dri-Block

®

heater ambient to 100°C, accepts 2 insert blocks 230V, 50-60Hz

DB100/2/115

Dri-Block

®

heater ambient to 100°C, accepts 2 insert blocks

115V, 50-60Hz

DB100/3

Dri-Block

®

heater ambient to 100°C, accepts 3 insert blocks

230V, 50-60Hz

DB100/3/115

Dri-Block

®

heater ambient to 100°C, accepts 3 insert blocks

115V, 50-60Hz

DB100/4

Dri-Block

®

heater ambient to 100°C, accepts 4 insert blocks

230V, 50-60Hz

DB100/4/115

Dri-Block

®

heater ambient to 100°C, accepts 4 insert blocks

115V, 50-60Hz

DB100/2TC

Dri-Block

®

heater ambient to 100°C, accepts 2 insert blocks,

twin control

230V, 50-60Hz

DB100/2TC/115

Dri-Block

®

heater ambient to 100°C, accepts 2 insert blocks,

twin control

115V, 50-60Hz

DB200/2

Dri-Block

®

heater ambient to 200°C, accepts 2 insert blocks

230V, 50-60Hz

DB200/2/115

Dri-Block

®

heater ambient to 200°C, accepts 2 insert blocks

230V, 50-60Hz

DB200/3

Dri-Block

®

heater ambient to 200°C, accepts 3 insert blocks

230V, 50-60Hz

DB200/3/115

Dri-Block

®

heater ambient to 200°C, accepts 3 insert blocks

115V, 50-60Hz

The features of individual models are outlined in the Specifications section of this manual.

Note: This manual covers the digital Dri-Block

®

heater range. The analogue Dri-Block

®

heaters DB-2A,

DB-3 and DB-3A are covered in a separate user manual.

This manual is related to the following products: