SUOMY F1 - Manual (Page 9)

ITALIANO
ASSEMBLING INSTRUCTIONS 08
S
To release the retention system,
undo the press stud and slacken
the tension by pulling the
release tab. Unthread the free
edge of the chinstrap from the
"D-rings".
Use the release tab to remove
the helmet only! Never use the
release tab while riding.
If the release system is not
working properly, do not use
the helmet.
When the chinstrap is tightened
correctly, fix the free end in
place using the press stud on
the release tab (3).
The press stud fixes the free
end of the chinstrap, avoiding it
flapping while riding. Fastening
the stud does not guarantee
that the helmet is worn and
attached correctly. The correct
tightness of the chinstrap must
be verified exclusively through
the operations described in the
previous paragraphs.
3
4