SUOMY F1 - Manual (Page 13)

ENGLISH
ASSEMBLING INSTRUCTIONS 12
BACK SPOLIER
The function of the back spoiler is only aerodynamics, the application or not of
this one does not modify the structural characteristics of the helmet.
The fixing is done with a bi-tape, the surface of application must be perfectly
cleaned and dry to guarantee the effective fixing of the part. To verify the
positioning of the spoiler on the helmet remove the protection film from the
bi-adesive tape, eventually use a pencil to mark the position before defining
the correct position. Make a pressure on the edge of the spoiler on the surface
of the helmet.
During the application avoid to touch the bi - tape with fingers. The fixing is
immediate the best performance of the bi-tape are obtained after 24 hours
by the application. Do not use the helmet during such a period.
HANS DEVICE
(Head and Neck Support)®
J12 F1 is homologated to be used with Hans
system. On the back of the shell there are two
treated holes (A) M5 to insert the Hans device
system. To assemble it follow carefully the
instructions contained in the leaflet of the
manufacturer.
A