Assembling instructions, D-ring – SUOMY F1 User Manual

Page 8

ENGLISH

ASSEMBLING INSTRUCTIONS

"D-RING"

Thread the free edge of the chin-
strap into the rings (1).

Pull the end until the chinstrap
presses firmly against the jaw.

Once this has been done, it
should no longer be possible to
pull the helmet off. Grip at the

back and roll the helmet for-
wards to make sure the helmet

does not come off, but remains
firmly on the head (2).
If the helmet tends to roll off or

twist freely on the head, tighten
the chinstrap again until the cor-

rect pressure is obtained then
repeat the test.
If the fastening system cannot

be effectively tightened even
after repeating the test, avoid

using the helmet.