Audiovox FPE3206DV - Manual (Page 36)

­ 35 ­
DVD System Setup
Preparations
1. Install the DVD module onto the LCD TV.
2. Connect to the power supply and turn on the unit.
3. Press the SOURCE button and select DVD, press the ENTER button to shift to DVD mode.
4. Press the SETUP button on the remote control to display the settings menu.
5. Press the 34 direction buttons on the remote control to select a category. All the items in the
category will appear on the screen.
6. Press the SETUP button again to exit the setup.
General Setup Page
Press the SETUP button to enter the General setup menu. The screen will display as the following:
TV Display
Angle Mark
In the menu, Use the 56 direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the 3 button to return.
1. Press the 56 direction buttons to select TV
Display.
2. Press the ENTER button to enter the setup.
3. Use the 56 direction buttons to select items.
4. Press the ENTER button again to confirm
selection and return.
Note: “Normal/Ps” and “Normal/Lb” are available
only when “HD Mode” is set to “Off”.
1. Press the 56 direction buttons to select
Angle Mark.
2. Press the ENTER button to enter the setup.
3. Use the 56 direction buttons to select On or
Off.
4. Press the ENTER button again to confirm
selection and return.