Audiovox FPE3206DV - Manual (Page 27)

­ 26 ­
System Setup and Operation(Continued)
Audio Setting
Audio Language
Press the ▲▼ button to select the Audio Language, press the ENTER button to select the desired
audio language.
TRUBASS
Press the ▲▼ button to select the TRUBASS, press
the ENTER button to enter the adjusting mode, then
press the ◄ ► button to adjust the value. Press the
ENTER button again to confirm and return.
Digital Audio Output
Press the ▲▼ button to select the Digital Audio Output, press the ENTER button to select RAW
or PCM.
NOTE: Select PCM to output a dual channel audio signal; select RAW to output an original audio
signal.
TV Speaker
Press the ▲▼ button to select the TV Speaker, press the ENTER button to select On or Off.
Mode
Press the ▲▼ button to select the Mode, press the ENTER button to select audio mode.
Restore Default Settings
Press the ▲▼ button to select the Restore Default Settings, press the ENTER button, all the
settings on this setup page will return to the default status.
Press the MENU button to enter the main
setup menu, as shown on the right:
In the menu, press the ▲▼ button to select
the Audio, and then press the ◄ or ►
button to enter the setup menu, press the
▲▼ button to select items. Press the ◄ or
► button again to return to the previous
menu. Press the EXIT button to exit the
setup menu.