Usb and sd/ms/mmc card function – Audiovox FPE3206DV User Manual

Page 35

USB and SD/MS/MMC Card Function

Preparation:
1. Install the DVD module onto the LCD TV.
2. Connect the unit to the power supply.
3. Press the POWER to turn on the unit.
4. Press the SOURCE button and select DVD, press the ENTER button to shift to DVD mode.
5. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC

card slot on the right side of the unit. Please see the below figure:

Make sure that files are stored in the USB and the SD/MS/MMC card before the connection.

6. Press the CARD button to shift among disc playback, USB playback and the SD/MS/MMC

playback. The default state is disk playback. Please see the below figure:

7. Press the 56 button to select the folder, and press the ENTER button to enter.
8. Press the 56 button to select the desired track. Then press PLAY4 button to start playback.
9. Press the STOP < button to stop playback: if the STOP< button is pressed, the playback will

start from the beginning of the current track. Press the 3button to return to the folder menu.

NOTE:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will be in

the state of disc playback again.

00:00

001/002

BAK
JPEG