Revo RELPTZ22-3 Advanced Features - Manual (Page 19)

REVO America www.revoamerica.com RELPTZ22-3
17
3. Select START ANGLE. Hold down the CTRL key while selecting the start position using
the joystick. Current panning position will be displayed. Release the CTRL key to complete
the selection of the start position. To fine adjust at the 0.1 degree interval, twist the joystick
at the pan field and the tilt field.
4. Select
END ANGLE. Hold down the CTRL key while moving the joystick to select the end
position. Release the CTRL key to complete the selection of the end position.