Revo RM185-OR1 - Manual (Page 8)

Before setting up the monitor, ensure that the power to the monitor and other attached
devices are turned off.
※ Notice: Stand & screws are optional.
A. Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction using the included
screws in the accessory box.
B. Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort. (Tilt Range: -3°~15°)
- 6 -
15˚ -3˚
Stand Body Stand Base
FS4x12 screws