NSi Industries DGS100A Series - Manual (Page 7)

5
the ON duration of each duty cycle . Skip the OFF
duration entry . The load will turn ON for the duration of
the ON period, and it will not be repeated .
Once you’ve selected a cycle time, you need to
program the schedule in Section 6 .0 . Schedule the
events whenever you need to start and end the duty
cycle or to execute a signal, such as school bells .
To skip, press the MODE key .
5.1 TO SET DUTY CYCLE AND SIGNAL
Press the ENTER key .
Press either HOUR, MIN, or SEC keys to set the time
to the desired ON duration for the cycle (ON C1) .
Press the ENTER key .
a) For signal timer application, press the ENTER key .
b) For a cycle program, press the HOUR, MIN, or SEC
keys to set the time to the desired OFF duration for
the cycle (OFF C1) . Press the ENTER key .