NSi Industries DGS100A Series - Manual (Page 11)

9
daylight savings dates noted by ON . To remove
daylight savings time setting, press DEL to
change screen to show OFF . DST may be activated
again by pressing DEL . Press ENTER to save
changes . To change from the standard DST month/
week/day setting press HOUR and refer to step 4 .1 .
6 . CYCLE MODE: To change duty cycle timing, press
either the HOUR, MIN, or SEC keys . Press ENTER to
save changes .
7 . SCH MODE: To change schedule, press ENTER to
advance to desired event . Press HOUR, MIN, EVENT,
and DAY to modify time settings . Press DEL to delete .
Press ENTER after each modification to save changes .
NOTES:
1 . Unit has a look back feature . Press the EVENT key
once to activate current schedule then EVENT
key again to return to the time (run) screen . Unit will
automatically pick up the last schedule .
2 . To clear date and time only and provide unit with
a soft reboot, press and release the reset button that is
recessed under the small hole to right side of LCD
screen .
3 . Clear all memory . To clear all memory, while in the
RUN mode, press ENTER, display will show:
Use the EVENT key to display:
Now Press ENTER briefly and everything in the timer
memory is cleared and 12HOUR will flash .