NSi Industries DGUM-A Series - Manual (Page 8)

6
For a single day holiday, press the ENTER key
(OR)
Press the MONTH, and DATE keys to set the date to
the desired end date (H1 OFF)
Press the ENTER key .
Repeat for all holidays .
Press MODE when holidays are complete .
6.0 SCHEDULE SET MODE
6.1 SETTING HOURS, MINUTES, AND DAYS
Note: A schedule is needed for each event . If a typical
ON/OFF pair is required, use SCH 01 for the ON
event and SCH 02 for the OFF event .
Press the HOUR, and MIN keys to set the desired time .
Press EVENT to set desired event (ON or OFF)
Press CH SELECT key to select channel on
two channel units .
Press DAY to set desired day(s) .
Note: With each DAY button push a different group of
days will appear .