NOSHOK 1800 Series Attachable Loop-Powered Indicator - Manual (Page 4)

Attention:
When running electric devices, parts of them will always be electrically
live. Unless the warnings are observed serious personal injuries or
damage to property may result. Skilled personnel only should be
allowed to work with this device. For trouble-free and safe operation of
the device please ensure professional transport, storage, installation
and connection as well as proper operation and maintenance.
Skilled personnel
Are persons familiar with installation, connection, commissioning and operation of the product
and have professional qualification relating to their job.
For example:
• Training or instruction resp. qualifications to switch on or off, isolate, ground and mark electric
circuits and devices or systems.
• Training or instruction according to the state.
• First-aid training.
Attention:
Do NOT use this product as safety or emergency stopping device,
or in any other application where failure of the product could result in
personal injury or material damage.
Failure to comply with these instructions could result in death or serious
injury and material damage.
3 Electric connection
To connect the E1999X200, it is simply plugged into an existing transmitter by means of a
special adapter for the cubic plug according to DIN EN 175301-803 A.
Supply voltage: 4 … 20 mA device takes power directly from measuring current
0 … 10 VDC 12 ... 28 V or according device declaration
Electric connection and commissioning of the device must be carried out by trained and skilled
personnel.
Wrong connection may lead to the destruction of the device, in which case we cannot assume
any warranty.
! Mind for the 0 … 10 VDC version, the maximum input current rating of 40mA under
any circumstances!
1010 West Bagley Road, Berea, Ohio 44017 P 440.243.0888 F 440.243.3472 www.noshok.com
4