beautypg.com

NOSHOK 1800 Series Attachable Loop-Powered Indicator User Manual

Page 13

background image

- Press button 1 to validate your selection. The display shows “

OFFS“ again.

- When pressing button 1 again, the device will display “

SCAL“ (scale = slope).

- Use button 2 and button 3 to select the desired slope-adjustment.
The slope adjustment will be entered in %. The value displayed can be calculated like this:
Display = (measured value – offset – di.Lo) * (1 + slope adjustment [% / 100] ) + di.Lo
Example: The setting is 2.00 => the slope has risen 2.00% => slope = 102%.

When measuring a value of 1000 (without slope-adjustment) the device would

display 1020 (with slope adjustment of 102%)

- Press button 1 to validate the selection of the slope-adjustment. The display shows “

SCAL

again.

Now you finished the offset and slope adjustment of your device.

Press button 1 to finish the adjustment and to switch over to display the measuring value.


Examples for offset- and slope-adjustment

Example: Connecting of a pressure-transducer
The device displays the following values (without offset- or slope-adjustment): 0.08 at 0.00 bar

and 20.02 at 20.00 bar.

Therefore you calculated: zero point: 0.08

slope:

20.02 – 0.08 = 19.94

deviation:

0.06 (= target-slope – actual-slope = 20.00 - 19.94)

You have to set:

offset =

0.08 (= zero point-deviation)

scale =

0.30 (= deviation / actual-slope = 0.06 / 19.94 =

0.0030 = 0.30%)

7 Min-/max-value storage

The device features a minimum/maximum-value storage. In this storage the highest and lowest

performance data is saved.
Calling of the minimum-value press button 3 shortly

the device will display “Lo“

briefly, after that the min-value

is displayed for about 2 sec.

Calling of the maximum-value press button 2 shortly

the device will display “Hi“

briefly, after that the max-value

is displayed for about 2 sec.

Erasing of the min/max values press button 2 and 3 for 2 sec. the device will display “CLr“

briefly, after that the min/max-

values are set to the current

displayed value.


1010 West Bagley Road, Berea, Ohio 44017 P 440.243.0888 F 440.243.3472 www.noshok.com

13