KYORITSU 3007A - Manual (Page 5)

CAUTION
● Always make sure to set the function switch or range selector switch to
the appropriate position before taking measurements.
● Do not expose the instrument to the direct sun, dew fall or extreme
temperature and/or humidity.
● When the instrument will not be in use for a long period of time, place it
in storage after removing batteries.
● Use a damp cloth soaked in water or neutral detergent for cleaning the
instrument. Do not use abrasives or solvents.
― 3 ―
DANGER is reserved for conditions and actions that are likely to cause
serious or fatal injury.
WARNING is reserved for conditions and actions that can cause
serious or fatal injury.
CAUTION is reserved for conditions and actions that can cause minor
injury or instrument damage.
DANGER
● Do not use this instrument on energized (LIVE) circuits.
● Do not take measurement in the presence of flammable gasses.
Otherwise, the use of the instrument may cause sparkling, which leads
to an explosion.
● Always keep your fingers behind the barrier on test probe during
measurement.
● Never use the instrument if its surface or your hand is wet.
● Never open the battery compartment cover while taking measurement.
WARNING
● Do not attempt to take any measurements, if any abnormal conditions
occur, such as broken test probe and cracked enclosure of the
instrument.
● Never change function switches with test probe connected to the
equipment under test.
● Do not install substitute parts, perform any unauthorized modification, or
disassemble the instrument. Return the instrument to Kyoritsu or your
distributor for service and repair so as to ensure the safety features are
maintained.
● Do not replace batteries when the surface of the instrument is wet.
● Make sure to disconnect the test probe from the instrument before
opening the battery compartment cover for battery replacement.
― 2 ―
3007A-E 01.9.12 11:52 AM ページ 2