KROHNE OPTIWAVE 5200 IECEx - Manual (Page 10)

1
GENERAL SAFETY INFORMATION
10
OPTIWAVE 5200 C/F
www.krohne.com 04/2013 - 4001906102 - AD IECEX OPTIWAVE 5200 R02 en
Figure 1-8: Remote version, Ex ic nameplate on the converter housing
Figure 1-9: Remote version, Ex ic nameplate on the antenna housing (fieldbus options only)
1 IECEx certification agency code
2 Types of device protection including approved Gas Groups, temperature classes (T6...T4 or T3 or T2 - depends on the
antenna type), equipment protection level
3 Types of device protection (explosive atmosphere - dust), zones, maximum surface temperature and degree of ingress
protection (if fitted with the appropriate cable glands)
4 4...20 mA passive - HART output option: 4...20 mA passive - HART output option: 4...20 mA passive - HART output option: 4...20 mA passive - HART output option: Intrinsically-safe circuit data
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options: Fieldbus (FF or PROFIBUS PA) options: Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters
5 Input voltage range and maximum current (4...20 mA passive - HART) / basic current (FF or PROFIBUS PA)
6 Cable entry type and size (M20×1.5 or ½ NPT)