KROHNE OPTIFLEX Hart - Manual (Page 8)

User Guide for Optiflex (TDR) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France)
Page
8 of 42
3.3.2 Set Output1
It allows fixing different values to the current output1 . It is a test mode. User can check the loop
currents in output1 and output2. The list of currents are displayed in the list box.
Once the appropriate current is selected the loop current is fixed to that current value. Check the loop
current by ammeter and validates the current as selected from the device. The loop current exits from
the current mode after clicking on 'Exit' or 'Cancel' from the method.