KROHNE OPTIFLEX Hart - Manual (Page 32)

User Guide for Optiflex (TDR) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France)
Page
32 of 42
3.12.4 Primary Output Setting
It allows user to change the upper and lower limit of the parameters set in the output selection plate for
the primary output function. The units of all these parameters are shown as set in the installation
plate2. Since only one pair of parameters can be set to the primary output function, hence the rest of
the parameters are disabled.