Asus K8V-X SE - Manual (Page 54)

2-18
SouthBridge Configuration
MPS Revision [1.4]
Sets the MPS revision value. Configuration options: [1.1] [1.4]
PCI Delay Transaction [Disabled]
Enables or disables the PCI Delay transaction feature.
Configuration options: [Disabled] [Enabled]
MPS Revision [1.4]
PCI Delay Transaction [Disabled]
Primary Graphics Adapter [AGP]
Switches the PCI Bus scanning order while searching for a video card. This allows
you to select the type of Primary VGA in case of multiple video controllers.
Configuration options: [PCI] [AGP]
AGP Mode [AGP 8X]
Allows you to set the data throughput of your AGP graphics card. This
motherboard supports the AGP 8X interface that transfers video data at 2.12GB/s.
The default and configuration options vary depending on the speed of AGP card
you installed. If you installed an AGP 8X graphics card, the configuration options
are as follows: [8X] [4X] or if you installed an AGP 4X graphics card, the
configuration options are as follows: [8X] [4X].
AGP Fast Write [Enabled]
Enables or disables the AGP Fast Write feature.
Configuration options: [Disabled] [Enabled]
Graphics Aperture Size [64MB]
Allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [32MB] [64MB] [128MB] [256MB]