beautypg.com

Electrical connections – KROHNE TIDALFLUX 4300 F Quickstart EN User Manual

Page 11

background image

ELECTRICAL CONNECTIONS

3

11

TIDALFLUX 4300 F

www.krohne.com

09/2010 - 7308302300 - QS TIDALFLUX 4000 R03 en

3.1 Safety instructions

3.2 Important notes on electrical connection

DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!

DANGER!
Observe the national regulations for electrical installations!

WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the
electrical components of the measuring device may only be carried out by properly trained
specialists.

INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.

DANGER!
Electrical connection is carried out in conformity with the VDE 0100 directive "Regulations for
electrical power installations with line voltages up to 1000 V" or equivalent national regulations.

CAUTION!

Use suitable cable entries for the various electrical cables.

The sensor and converter are configured together in the factory. For this reason, please
connect the devices in pairs. Ensure that the sensor constant GK (see type plates) are
identically set