Aquatic Infinity 2 AI2INF7135 - Manual

13
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
March 2008
Rough-In Plumbing
Measurements
GeneRal SPecIfIcatIonS:
Tub Size 70” x 35 1/2” x 30 3/4”
178 cm x 90 cm x 78 cm
Bathing Well 44” long
20” wide
22” interior depth
Seat 13 1/2” long
15” wide
Maximum Water Depth 18 1/2”
Shipping Weight
356 lbs. / 161 kg
Tub Weight Filled 956 lbs. / 434 kg
Weight w/Equipment 109 lbs. / 49 kg
Gallons to Overflow
102 gal. / 386 L
Gallons to Operate 69 gal. / 261 L
electRIcal SPecIfIcatIonS:
Pump 2 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
This unit has a 3/4” female waterfall fill spout connection.
INFINITy SErIES
model # AI2INF7135
• Available without fast-fill waterfall spout
- See Price List for Details
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
•
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
• Hand Held Jet - Chrome or Polished Brass
•
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
oPtIonal equIPMent:
Pump
Fill Spout Location
(not shown)
no alternate pump location available.
Blower
INFINITy 2
35 1/2”
70”
note: Please allow
for plumbing to extend
approx. 3” beyond
tub rim.
30 3/4”
26 1/4”
23 1/4”
23”
fax-on-Demand
Document # 1116
StanDaRD equIPMent:
16 Hydrotherapy Jets including:
- 12 Shiatsu Back Jets
- 2 Rotary Massage Foot Jets
- 2 Full Size Pressure-Flo Hydrotherapy Jets
air Bath System:
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
aquatic quality features:
- 2 HP Run-Dry Pump
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Shiatsu Electronic Control Panel with Preprogrammed Jet Sequencer
- Bath-Side Electronic Control Panel with Temperature Display
- Pulsating Neck Jet Pillow
- Reclining Lounge Seat and 2 Arm Rests
- Integrally Molded Fast-Fill Waterfall Spout/Optional
- please specify on order (valves not included)
- Chromatherapy
- Slip Resistant Floor
- Adjusta-Level Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
note: Infinity 2 is not a drop in model.
a deck must be built around the tub.
2 3/8”
9 1/2”
44”
18”
20”
Back Angle 33˚
4 1/2” *available without fast-fill waterfall spout.