KROHNE OPTISWITCH 6600 C EN - Manual (Page 23)

APPENDIX
8
23
OPTISWITCH 6600 C
www.krohne.com 01/2014 - 4001367704 - MA OPTISWITCH 6600 R04 en
8.1 Order code for OPTISWITCH 6600 C
Order code for configuration tool (incl. interface unit + USB cable + CD with driver +
alligator clips + M12 connection cable)
VGPA 1 OPTISWITCH 6600 C, with IP67 (equivalent to NEMA4X), stainless steel housing -
FDA compliant materials
The use of a VGP7 process connections is required for 3A approved switches.
Process connection Process connection Process connection Process connection
1 G½ - standard sensor length 18 mm / 0.7" (for use with hygienic process
connections)
2 G1 - standard sensor length 18 mm / 0.7" (not hygienic)
3 G½ - standard sensor length 18 mm / 0.7" (not hygienic)
4 G½ A - for reverse mounting (not hygienic)
Electrical connection Electrical connection Electrical connection Electrical connection
1 M12 - 4-pin connector plug
2 IP68; 5 m / 16.4 ft non shielded cable with flying leads (max. temperature:
+70°C / 158°F
Approvals Approvals Approvals Approvals
0 Without
1 Certified acc. to 3A, G½ in combination with hygienic adapter VGP7
Output Output Output Output
0 PNP output
1 NPN output
Output configuration Output configuration Output configuration Output configuration
0 Standard
1 Customer settings - based on data from an installed device.
"% of triggering, damping, hysteresis, output mode" to be
specified separately.
VGPA VGPA VGPA VGPA 4 1 0 0 Order code
XGP9 XGP9 XGP9 XGP9 0 0 0 0 1 0 Order code