KROHNE OPTISWITCH 6600 C EN - Manual (Page 20)

7
TECHNICAL DATA
20
OPTISWITCH 6600 C
www.krohne.com 01/2014 - 4001367704 - MA OPTISWITCH 6600 R04 en
Materials
Sensor housing Stainless Steel 1.4404 / 316L
Process connection
Sensor insulation Virgin PEEK, FDA conform
Electrical connection Plug M12
Process connections
Standard Hygienic G½; standard G½; G1 and reverse G½
Other For other hygienic process connections, e. g. Tri-clamp, 11851, Varivent
please refer to the chapter "Order code".
Electrical connections
Power supply 12…30 VDC, 35 mA max.
Power consumption 1.1 W
Power-up time < 2 s
Reaction time Max. 0.2 s
Damping 0...10 s
Cable entry M12 (4 pole Lumberg)
Output
Output (active) Max. 20 mA, short-circuit and high-temperature protected
Output type PNP or NPN
Output polarity See drawing in chapter "Electrical connection".
Active "Low" NPN; (-VDC + 1.5 V) ± 0.5 V; R
load
= 10 kOhm
Active "High" PNP; (VDC - 1.5 V) ± 0.5 V; R
load
= 10 kOhm
Factory settings Measure: ε
r
> 2; damping: 0.1 s
Off leak current ± 100 μA max.
Approvals and certifications
CE This device fulfils the statutory requirements of the EC directives.
The manufacturer certifies successful testing of the product by applying the
CE marking.
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
Electromagnetic compatibility (EMC) EN 61326-1 (2006)
Vibration resistance IEC 60068-2-6, GL test 2
Hygiene 3A for hygienic G½, FDA conform materials