KROHNE OPTIMASS 8000K EN - Manual (Page 30)

6
TECHNICAL DATA
30
OPTIMASS 8000K
www.krohne.com 08/2010 - 4000921002 - MA OPTIMASS 8000k R02 en
Operating conditions
Maximum flow rates Maximum flow rates Maximum flow rates Maximum flow rates
S15 3510 kg/h / 128.7 lbs/min
S25 11700 kg/h / 429 lbs/min
S40 41600 kg/h / 1525.3 lbs/min
S80 110500 kg/h / 4051.6 lbs/min
S100 325000 kg/h / 11916.6 lbs/min
Assumes operating density 1000 kg/m 3 / 62.4 lb/ft 3
Ambient temperature Ambient temperature Ambient temperature Ambient temperature
Compact version with Aluminium
converter
Standard temperature range: -40...+60°C / -40…+140°F
Cryogenic temperature range: -25...+40°C / -13…+104°F
Compact version with Stainless Steel
converter
Standard temperature range: -40...+55°C / -40…+131°F
Cryogenic temperature range: -25...+40°C / -13…+104°F
Remote versions Standard temperature range: -40...+65°C / -40…+149°F
Cryogenic temperature range: -20...+65°C / -4…+149°F
Hazardous Area versions Refer to temperature limits
Process temperature Process temperature Process temperature Process temperature
Standard temperature range Standard temperature range Standard temperature range Standard temperature range
Safe area (compact and remote version) -70…+230°C / -94…+440°F
Hazardous area (standard temperature,
compact version only)
-40…+190°C / -40…+370°F
Hazardous area (standard temperature,
remote version only)
-40…+230°C / -40…+440°F
Hygienic connections -70…+150°C / -94…+302°F
Cryogenic temperature range Cryogenic temperature range Cryogenic temperature range Cryogenic temperature range
Safe area -195…+40°C / -310…+104°F
Hazardous area -195…+40°C / -310…+104°F
Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20°C / 68 C / 68 C / 68 C / 68°F F F F
Measuring tube Measuring tube Measuring tube Measuring tube
PED 97/23/EC -1…100 barg / -14.5…1450 psig
FM Pending
CRN / ASME B31.3 Pending
Fluid properties Fluid properties Fluid properties Fluid properties
Permissible physical condition Liquids, gases, slurries
Permissible gas content (volume) Contact manufacturer for information.
Permissible solid content (volume) Contact manufacturer for information.
Protection category (acc. to EN 60529) IP 67, NEMA 4X
Installation conditions
Inlet runs None required
Outlet runs None required
MA_OPTIMASS_8000k_en_100817_4000921002_R02.book Page 30 Tuesday, August 17, 2010 2:08 PM